Advertisement
5. MAINTENANCE
5.1.
Check and clean suction and detergent filters every 50 operating hours. Undo hose and gently prise filter out with a screw driver (fig 8).
5.2.
Clean gun nozzle with the pin provided (fig 9). Detach lance from gun, remove any dirt from the nozzle head and rinse with clean water.
5.3.
Winter storage: Operate the washer with non-corrosive/non-toxic anti-freeze before storing in a frost free, safe, dry area for the winter.
5.4
Change engine oil after 5 hours of operation. Thereafter, change oil monthly or every 50 hours of operation. Change oil more often if
engine is operated under heavy load, or in high ambient air temperatures. During normal operation, partially burned fuel, small particles of
metal from the cylinder walls, pistons, bearings and combustion deposits will gradually contaminate the oil. If the oil is not changed
regularly, these foreign particles can cause increased friction and a grinding action which shortens the life of the engine. Fresh oil also
assists in cooling. Old oil gradually becomes thick and loses its cooling ability as well as its lubricating qualities. For further details of
engine maintenance refer to the engine maintenance manual.
fig 8.
6. TROUBLESHOOTING GUIDE
PROBLEM
Pump does not operate at
required pressure
Pressure drops during use
Pump noisy
Oil leaks
Fluctuating pressure
Declaration of Conformity We, the sole importer into the UK of Sealey Power Products, declare that the products listed below are
in conformity with the following EEC standards and directives.
Pressure Washer PCM1500.V2/1750.V2
73.23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
REASON
Nozzle incorrect or worn
Air being sucked into the system
Water leakage
Valves dirty or worn
Nozzle worn
Dirty filter
Pump sucking air
Valves dirty or worn
Water too hot
Dirty filter
Oil seals worn
Valves worn, dirty or stuck
Pump sucking air
Worn piston packing
Dirty filter
The construction files for these products are held by the Manufacturer
and may be inspected by a national authority upon request to Jack
Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 703534
REMEDY
Replace the nozzle
Check that hoses and fittings are air tight
Clean or replace valve
Replace the nozzle
Clean or replace
Check that hoses and fittings are air tight
Clean or replace valve
Reduce temperature
Clean or replace
Check and replace
Check, clean or replace
Check that hoses and fittings are air tight
Check and replace
Check and clean
sales@sealey.co.uk
e-mail
21st May 2003
www.sealey.co.uk
9A>
PCM1500.V2/1750.V2 - 1 - 270503
Advertisement
