Advertisement
Assembly
4. Slide into the enclosure and secure
Slide the assembled zero clearance box into the enclosure and fix the top and sides to the enclosure.
There are two sets of screw holes, the set you use will be dependent on the cladding thickness. The zero
clearance box MUST BE installed flush with the cladding surface to ensure alignment of the flue.
Top of zero clearance box
Top of Neo engine
5. Apply edge protector
Apply white edge protectors provided in the assembly pack to the gas and electrical access holes.
6. Side rails
Side rails (number 8 on front page) need to be attached to the top of the Neo engine as shown.
Side rails
Rinnai New Zealand Ltd.
Rinnai Australia Pty. Ltd.
Cladding surface
Zero clearance box
front cutout
0800 746 624
1300 555 545
Spigot guide handle
N
4
RIB2310/RIB2311 Sapphire/Neo Zero Clearance Box Assembly
11955-F 06-14
Advertisement
