Advertisement

Quick Links

HCD139(B022)
!
Please ensure the phone is placed in a dry and ventilated place without corrosive air.
Please install 3 x AA batteries for viewing the LCD display. If the LCD does not display
clearly, please change the batteries to ensure the normal function of the unit.
Before operation, please check if you had applied for caller ID service from Telecom for
caller ID display. Please remove any branch box or abuse resistant device to avoid
failure in receiving incoming call number.
FEATURES :
FSK / DTMF Caller ID receiving, auto detecting
16 digits display, and two LCD display modes:
Line 1:20 incoming call memories, 5 outgoing call memories and 20 VIP numbers setting
Line 2: 20 incoming call memories and 5 outgoing call memories
12 two-touch memories(16 digit)
3 one-touch memories
Line 1: 32 digits Auto IP dialing
Line 1: 32 digits IP key
5 digits area code filtering
16 melody rings
32 digits pre-dialing
Auto redial and one-key redial

Operation for two lines

When use one line , choose Line 1 .
Receiving incoming calls: when receiving two incoming calls at the same time, press LINE 1or
LINE 2 to select the call you want to answer or press CONE to answer two line , otherwise the
call will be received automatically.
When calls coming, pick up the handset or press HAND-FREE for talking ,connected line 1
automatically .Press LINE 1 will be connected automatically at the hand-free state. Press LINE 2
to connect LINE 2.
Switch between line 1 and line 2, when line 1 is in communication, press LINE2 to switch on line
2 while line 1 hanged up automatically, and vice versa. When line 1 is in communication, press
HOLD and then press LINE2, line 2 is switched on while line 1 is in holding automatically, and
vice versa.
Switch between handset and hand-free ,no matter which line at the hand-free state, pick up the
handset to talk while hand-free is off, and vice versa.
When line 1 is on hand-free, press LINE1 or HF key to hang up and line 2 keeps unchanged and
vice versa. Use handset to hang up the line in communication and the other line keeps unchanged.
If in trilateral talk, two lines will be halt together.
Music Hold when one line is in using, press HOLD to keep and the indicator is flashing slowly. If
in trilateral talk, two lines will be hold at same time.
When line 2 is not in use and line 1 is in hold, pick up handset/press HF/press LINE1 to continue
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HCD139 and is the answer not in the manual?

Questions and answers

Summary of Contents for Crave HCD139

  • Page 1 HCD139(B022) Please ensure the phone is placed in a dry and ventilated place without corrosive air. Please install 3 x AA batteries for viewing the LCD display. If the LCD does not display clearly, please change the batteries to ensure the normal function of the unit.
  • Page 2 HCD139(B022) the talk and vice versa. If both lines are in hold, pick up handset/press HF to continue the talk in line 1 and line 2 keeps in hold, or press LINE 1 or LINE2 directly to continue the talk in corresponding line and the other line keeps in hold.
  • Page 3 HCD139(B022) input mistakes. If the AUTO IP function is on, the stored IP data will be automatically added first when you dial a number beginning with “0” at the on-hook pre-dialing mode, or re-dialing a previously called number (either incoming or outgoing) beginning with “0”. When “0”Lock or Full Lock is effective, Auto IP setting is not permitted.
  • Page 4 HCD139(B022) telephone should be unlocked.). When line 1 at off-hook state, press RD when the number display on LCD. PRE-DIALING AT THE ON-HOOK STATE Enter a phone number and press the RD key. In the case of any input mistakes, use DEL to correct.
  • Page 5 HCD139(B022) redialing at on-hook state, the pause time between PABX exit code and phone number is about 1 second. LED INDICATOR&BACK-LIGHT When any new incoming call is missing, the LED indicator flashes .Checking the new call or operating the telephone will make the LED turned off. The back-light will be turned on when receiving an incoming call or dialing, and switched off 6 seconds later after operating finished.

Table of Contents