Charge Through The Ac Adaptor - Nevir NVR-2762DVD-PGUTHD User Manual

7. RECALL
DVD: (For VCD, PBC on) Return to the PBC menu.
DVB-T: Returns to the previous channel; renames channels in Program
Edit menu.
USB: Returns to the previous folder
8. ZOOM / ASPECT
DVD/USB: Zooms in or out a picture/video image.
DVB-T: Adjusts screen aspect ratio.
9. ANGLE
DVD: Selects a different viewing angle of a DVD.
10. PROG
DVD: Program tracks.
11. REPEAT
DVD/USB: Repeats a chapter/track/title.
12. GO TO
DVD/USB: Skip to a chapter/track/title or a play time.
13. TELETEXT
DVB-T: Toggles teletext on or off.
14. AUDIO
DVD: For DVD, selects an audio language; for VCD, selects an audio
mode.
DVB-T: Selects an audio language of present service.
USB: For movie, selects an audio mode.
15. SUBTITLE
DVD: Selects DVD subtitle language.
DVB-T: Selects subtitle language of present service.
USB: Accesses the subtitle menu.
16. EPG
DVB-T: Toggles the Electronic Program Guide (EPG) on or off.
Enabled on digital channels only.
17. INFO
DVD/USB: Displays play information, if available.
DVB-T: Displays program information, if available.
18. FAV
DVB-T: Accesses or exits the favorite channel list.
19. LIST
DVB-T: Displays the list of channels.
20. TV/RADIO
DVB-T: Switches between radio and TV.
21. EXIT/
DVD/USB: Stops play.
DVB-T: Goes to the previous menu.
22. SOURCE
Switches between DVD, DVB-T and USB.
23. DVD MENU
For DVD, accesses or exits disc menu.
For VCD, turns on or off PBC (Playback Control) mode.
24. SETUP
DVD/DVB-T: Selects or exits the setup menu.
Preparation of the Remote Control
Place the remote control on an even surface and insert the supplied button
cell into the remote control as follows.
1. Push the button towards left.
2. Pull the battery loader out.
3. Insert the battery into the receptacle make sure the polarity matches the
marks inside the component.
4. Insert the receptacle into the remote control.
2
Cell data
Battery type: 1x CR2025 , 3 V
Service life: approximately 1 year (for normal use and room temperature).
Using Of Remote Control
Point the remote control towards the main unit when operating.
The remote control works best at a distance less than 5 m and at an angle
of up to 30 to the front of the unit. No obstacles may stand in the way
between remote control and infrared sensor and do not place the remote
control in direct sunlight. If the remote control unit fails to work even when
it is operated near the player, replace the battery.
Notes on batteries
If the remote control is not used for a long period of time, please remove
the battery from the compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.

Charge through the AC adaptor

You can only charge the player when it is powered off or in standby mode.
1. Make sure that you have connect the player to power.
2. On the main unit, slide the ON /OFF switch to the OFF position. '
Alternatively, press POWER on the remote control to switch to standby
mode.
The CHR indicator turns on (red).
When the battery is fully charged, the CHR indicator turns off.
CR2025
1
'
3