Additional Safety Instructions - TACKLIFE PPGJ01A User Manual

source and/or battery pack,picking up or carrying the tooI.Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.A wrench or a key left attached
to a rotating part of the power tool may result in personal injury.
e) Do not overreach.Keep proper footing and balance at all times.This enables better control of the
power tool in unexpected situations.
f) Dress properly.Do not wear loose clothing or jewellery.Keep your hair,clothing and gloves away from
moving parts. Loose clothes Jewellery or long hair can be caught in moving parts.
g) lf devices are provided for the connection of dust extraction and collection facilities,ensure these are
connected and properly used.Use of dust collection can reduce dust-related hazards.
4) Powertool use and care
a) Do not force the power tool.Use the correct power tool for your application.The correct power tool will
do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off .Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments,changing accessories,or storing power tools.Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools.Check for misalignment or binding of moving parts,breakage of parts and any
other condition that may affect the power tool's operation.If damaged,have the power tool repaired
before use.Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool,accessories and tool bits etc,in accordance with these instructions,taking into
account the working conditions and the work to be performed.Use of the power tool for operations
different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts.This will ensure that the safety of the power tool is maintained.

ADDITIONAL SAFETY INSTRUCTIONS

1. This tool is designed to be used as a polisher. Read all the warnings,instructions,indications provided
on drawings and specifications supplied with this tool.Failure to comply with all the instructions
provided may caused electrical shocks,fire and/or serious injuries.
2. This tool is not intended to be used for something,mental brushing and cutting operations.The use of
this tool for unintended applications may cause hazards and injuries to people.
3. The tool must be used with accessories that have been specifically designed or recommended by the
manufacturer.The fixing of the accessory to the tool does not guarantee a safe operation;read the
following additional instructions.
4. The rated speed of the accessories must be at least equivalent to the maximum speed specified on
the tool.Using the accessories at speeds above the rated one,may cause them to break or be project-
ed into the air.
5. The external diameter and thickness of the accessories must match the specifications of the tooI.
Accessories with incorrect dimensions cannot be adequately protected or controlled.
6. The configuration of accessories must match the tooI.The use of accessories that cannot be perfectly
fitted on the tool may result in imbalance,excessive vibrations and in the impossibility of controlling
the tool.
7. Do not use damaged accessories.Before use,inspect all the accessories.Inspect the supporting pads
and verify there are no cracks,tears or excessive wear.If the tool or accessory has fallen, verify that
they are not damaged or install a new accessory .After inspecting or installing an accessory，test the
operation of the tool at maximum speed and without load for one minute,keeping at a safety
- 02 -