Using The Backlight; Dimmer Light Setting; Dimmer Time Setting; Controlling How Much Information Appears - Uniden BC296D Owner's Manual

Using the Backlight

To turn on the backlight, press
describe how to change the backlight options.

Dimmer Light Setting

The Dimmer Light setting sets the brightness of the display
backlight.
3:SYSTEM OPTION → 1:DIMMER →
1:DIMMER LIGHT
1:HIGH
Set the backlight to the brightest setting
2:MEDIUM
Set the backlight to be dimmer

Dimmer Time Setting

The Dimmer Time setting adjust how long the backlight stays
on when activated.
3:SYSTEM OPTION → 1:DIMMER →
2:DIMMER TIME
1:15SECONDS
Set the backlight to stay on for 15 seconds then turn
off
2:INFINITE
Set the backlight to stay on until you manually turn it
off.

Controlling How Much Information Appears

The scanner normally displays trunk, frequency, receiving
mode, and a signal meter when it is scanning. This option
allows you to reduce how much information your scanner
displays.
3:SYSTEM OPTION → 2:SCREEN MASK
1:ON
Display all information
2:OFF
Display reduced information
. The next two sections
22