George Home Wooden dolly highchair Assembly Manual

Wooden dolly highchair
Assembly Guide
IMPORTANT: RETAIN FOR FUTURE REFERENCE
WARNINGS:
• IMPORTANT SAFETY INSTRUCTIONS
• PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USE AND RETAIN FOR FUTURE
REFERENCE.
• Adult assembly required.
• The hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small
children.
• WARNING! Not suitable for children under the age of 36
months. Components of this product may break off into
small parts presenting a choking hazard.
• Choking hazard: Unassembled parts may be a choking
hazard to children 3 years and younger.
• To avoid the danger of suffocation, keep any bags
or packaging away from babies and children. Any
packaging or bags are not part of the toy and must be
disposed of immediately before assembling the toy.
• This is a role-play toy. It must not be used to transport or
accommodate children, babies or pets.
You will need...
Cross head / Philips
screwdriver suitable
for use with the screws
provided.
Getting started...
1. Unpack the 2. Place the
components components
and check on a clean
against the list surface to
below. prevent them
from being
damaged.
You will have...
A x1 E x1
B x1 F x1
C x1 G x1
D x2 H x14
Step 1
Slot the seat (B)
into the groove
on the left side
(A).
Fasten the seat
to the side using
two screws (H).
3. After you have
assembled
B
your toy,
dispose of all
packaging.
Step 2
Attach the seat
back (C) to the
highchair side
using two screws
(H).
H
H
A
C