Download Print this page

Bazoongi BZ7524 User Manual

88inch / 2.23m 7.5ft hexagonal kids combo trampoline and enclosure

Advertisement

Quick Links

7.5FT HEXAGONAL KIDS COMBO
TRAMPOLINE AND ENCLOSURE
9#40+0)
Read the assembly, installation,
care,maintenance, and use
instructions in this manual prior
to assembling and using this
trampoline/enclosure.Save this
manual for future reference.
9#40+0)
Recommended for use by children between 3~10 years of age.
Maximum weight limit: 100lbs(45kgs). Do not exceed the weight limit recommended
by the manufacturer.
Please read all of the direction prior to assembly. Do not apply excess force during
assembly. Assemble only with adult supervision. Use gloves to protect your hands
from pinch points and sharp points during assembly.
Warning! Not suitable for children under 36 months. Small parts and long cords may
be a choking and strangulation hazard.
88INCH / 2.23M
USER'S MANUAL . . . . . . . . . . . . 3
Assembly, Installation, Care,
Maintenance, and Use Instructions.
YJ USA Corp.,
3970 Lindbergh Drive
Addison, TX 75001
Customer Hotline: 1-877-927-8777
www.jumppod.com
www.jumpking.com
Model: BZ7524

Advertisement

loading
Need help?

Need help?

Do you have a question about the BZ7524 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bazoongi BZ7524

  • Page 1 88INCH / 2.23M 7.5FT HEXAGONAL KIDS COMBO TRAMPOLINE AND ENCLOSURE Model: BZ7524 9#40+0) USER’S MANUAL ... . 3 Read the assembly, installation, care,maintenance, and use instructions in this manual prior...
  • Page 2: Table Of Contents

    1-877-927-8777 7.5FT HEXAGONAL KIDS COMBO TRAMPOLINE AND ENCLOSURE REPLACEMENT PARTS Model: BZ7524 www.jumppod.com www.jumpking.com CONTENTS IMPORTANT PRECAUTIONS ......3 ASSEMBLY .
  • Page 3: Important Precautions

    WARNING: This product is intended for use by children between 3-10 years of age. This enclosure is to be used only in connection with this trampoline. Read and follow all warnings and instruction. This product is intended to be assembled by an adult. Maximum weight limited 45kg/100lbs.
  • Page 4: Assembly

    ASSEMBLY TRAMPOLINE/ENCLOSURE PLACEMENT IMPORTANT ASSEMBLY INFORMATION A Phillips Head screw driver is needed to 1. Place the trampoline/enclosure on a level surface assemble trampoline/enclosure. However, a before use. screwdriver is not provided. Assembly requires two persons. Keep 3. Use the trampoline/enclosure in a well-lit children away from the trampoline/enclosure area.
  • Page 5 Insert the top tube into the POD-connector. Repeat this step until all six leg sections are connected. 3. Lay the Bed (5) on the ground inside of the assembled frame. Make sure that the Bazoongi printing logo are on top of the Bed. Spring POD-Connector Note: There are V-rings around the edge of the Bed (5) and holes around the top of the frame.
  • Page 6 4. Lay the Frame Pad (6) on the frame. Adjust the position of the Frame Pad so the notches are aligned with the Legs (3) as shown. Be sure 6 Enclosure Frame Openings are fitted to the POD-connector position. Do not use the trampoline without the Frame Pad (6), which is designed to reduce the likeli- hood of injury to the user from coming in con- tact with the trampoline frame.
  • Page 7 The trampoline is now fully assembled. Make sure that all parts are securely attached. Familiarize yourself and all users of the tram- poline with the safety precautions, use and instructional materials, and care and mainte- nance instructions in this manual before using the trampoline.
  • Page 8 10. Lay out Top G3 Pole (18), joint each section 6 Sections Per Line connector to a straight line as shown. Top G3 Pole (18) Assemble the remaining Top G3 Pole (18) in the same way. Spread out G3 Pole and Joint each section to one straight line.
  • Page 9 Note: During steps 12 and 13, you will “sew” the lower edge of the netting(12) to the V-ring and webbing loop on the bed using the cords(16). Locate the V-ring closest to the door. Thread one end of a cord(16) through the lower edge of the Webbing loop netting(12) above the V-ring and then thread the cord through the V-ring.
  • Page 10: Care And Maintenance

    CARE AND MAINTENANCE Care sleeves. - punctures, frays, tears, or holes worn in the bed, frame Do not allow pets or animals on the trampoline or pad, netting, foam sleeves. inside the enclosure, as claws may snag and pull the - deterioration in the stitching or fabric of the bed, frame bed material or damage the frame pad or netting.
  • Page 11: Exploded Drawing And Part List

    EXPLODED DRAWING AND PART LIST Qty. Description Qty. Description Enclosure Foam Sleeves Top Tube with POD-connector Netting with attached Hardware POD-connector User’s Manual Straight leg Self-tapping Screw 5” Length Springs Spring Pulling Tool Stitched Bed with V-rings Cord Frame Pad Plastic Cap(have been attached to Leg foam sleeve the Enclosure top pole 10)
  • Page 12 BZ7524 Hexagon: Parts Lis ng Part SKU No. Key No. Descrip on Picture Top Rail for POD-Connector with 6 holes for 7.5' BZHX7.5-TR6 Hexagon Trampoline BZHX7.5-PODC POD-Connector for 7.5' Hexagon Trampoline BZHX7.5-LE Leg Extension for 7.5' Hexagon Trampoline 5" springs 7.5' Hexagon jumping surface with 36 v-rings...
  • Page 13 BZ7524 Hexagon: Parts Lis ng Part SKU No. Key No. Descrip on Picture Enclosure foam sleeve blue color for BZHX7.5-EFSB 7.5' Hexagon Enclosure ne ng for 7.5' Hexagon NETHX7.5-JP6 with 6 poles User Manual MANUAL User's Manual for BZ7524 HWSTS-S12...