Advertisement
Emotiva VSUB-1
The Emotiva VSUB-1 is used to connect from one to
four subwoofers to the subwoofer output of a home
theater receiver or processor. To use the VSUB-1 wireless
subwoofer system, a VSUB-1T transmitter is connected
to the subwoofer output on your processor or AVR, and
a VSUB-1R receiver is connected to the input on each of
your subwoofers. The wireless links established by the
VSUB-1 then act just like audio cables, connecting all
of your subwoofers to the subwoofer output of your
processor or AVR.
A single pair, consisting of a VSUB-1T, and a VSUB-1R,
can be used to connect a single subwoofer. Additional
VSUB-1R receivers can then be added to connect more
subwoofers to the same output (up to four total). If you
have stereo or multiple subwoofer outputs, you may
connect a separate VSUB-1T transmitter to each.
Features and Specifications:
Line Input (transmitter): Analog, unbalanced
Line Output (receiver): Analog, unbalanced
Maximum signal level: 2 VRMS
Frequency response: From 10 hz to 2 kHz +0/-2 dB
S/N ratio: 98 dB (@1 kHz, A weighted)
THD (1 kHz): < 0.25%
Audio channels: 1
Audio fan-out: Up to four VSUB-1R receivers can be
paired with each VSUB-1T transmitter.
Method of transmission: Proprietary wireless link
Range: Up to 50 feet (obstructions will reduce range)
Power requirements: VSUB units require 5 VDC mini-USB
(Universal 100 - 250 VAC AC adapters provided)
Indicators: Power LED (green)
Advertisement
