Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for American Turbine SD203
- Page 1 SD203 OWNER MANUAL SUPER DUTY JET 203mm Axial Flow THE POWER IS IN THE PUMP...
- Page 2 OWNERS MANUAL AMERICAN TURBINE SD-203 Before Operating your jet boat Read this manual carefully. Learn how to operate your boat properly. If you have any questions, contact your dealer. Safety and operating information that is practiced along with using good common sense can help prevent personal injury and product damage.
-
Page 3: General Maintenance
1. Salt water operation. The SD203 is designed for a trailer boats and is not intended for boats that are moored in salt or brackish water. It can be used in salt water but must be flushed with fresh water after daily use. It is recommended that your SD203 be dis- assembled down to the impeller and remove all signs of corrosion and coat all mating parts with an anti-corrosion compound such as LANOCOTE. - Page 4 6. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. 7. This warranty is the only express warranty applicable to American Turbine, Inc. products, and is in lieu of any other express or implied warranties, including warranties of merchantability and fitness for a particular purpose.
-
Page 5: Warranty Registration
11. Owner Signature ______________________________________________________________ Date ________________ 12. Dealer Signature ______________________________________________________________ Date ________________ This Warranty Card must be completed and mailed to American Turbine. The jet drive warranty is void if registration is not mailed within 15 days of date of sale. AMERICAN TURBINE 3692 RIVERSIDE DR. - Page 6 American Turbine SD203...
- Page 7 B1502 O-RING, BEARING HOUSING, SD203, 309, 312 O3301 SEAL, BOWL (AT, BERK, LATE DOM) SL2003 O-RING, SEAL FACE HOUSING, SD203, 309, 312 O3401 5/16-18 X 3/4 HEX HEAD CAP SCREW F05 18 06 HH BEARING HOUSING, SD203, 309, 312 SC2101...
-
Page 8: Mechanical Seal
American Turbine SD203 GREASE ZERK for MECHANICAL SEAL STATOR BEARINGS IMPELLER GREASE ZERK for THRUST BEARING INTAKE ADAPTER NOZZLE INSERT ROCK GRATE... -
Page 9: Bearing Housing
American Turbine SD203 HAND HOLE REVERSE COVER BUCKET WEEP HOLE STEERING EXTENSION GREASE ZERK BEARING HOUSING NOZZLE HOUSING INTAKE SUCTION PIECE STATOR STEERING ADAPTER NOZZLE... - Page 10 SD203 SPECIFICATIONS FASTENER TORQUE PUT STRAIGHT EDGE 1/4" 10 FT/LBS ACROSS WEAR RING. SHIM IMPELLER 5/16" 15 FT/LBS TO 0.030 FORWARD FROM THE BACK 3/8" 20 FT/LBS OF THE WEAR RING. 1/2" 40 FT/LBS 5/8" 45 FT/LBS USE HIGH STRENGTH...
Need help?
Do you have a question about the SD203 and is the answer not in the manual?
Questions and answers