Fcc Information - Uniden ALP9094 Owner's Manual

FCC Information

Your pager can interfere with the operation of other
electrical devices even when it is functioning properly.
To determine if your pager is causing interference, turn
the pager off while observing the affected device. If the
interference goes away, it was probably caused by your
pager. To eliminate the interference, move the pager
away from the affected device.
If the interference cannot be eliminated, the FCC requires
that you stop using your pager.
Modifying or tampering with your pager's internal
components can cause a malfunction and void your FCC
authorization to operate it. If your pager is not
performing as it should, contact your pager service.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause any harmful interference,
and (2) this device must accept interference received,
including interference that may cause undesired
operation.
Ô
Clearvue is a proprietary trademark of Uniden America
Corporation.
©1998 Uniden America Corporation All rights reserved.
Printed in the Philippines