Origaudio DRIPZ User Manual

USER MANUAL
CHARGING THE DEDICATED CARRYING CASE
Note: Before charging your Dripz earbuds for the first time,
please remove and discard the plastic film from the back of each
earbud.
Connect the provided USB charging cable to a power source and
insert the USB-C tip into the charging port located on the back of
the carrying case. Indicator lights on the front of the case will
light up and blink when Dripz are charging. The Dripz are at full
battery capacity once all four (4) lights are lit up. Let the Dripz
reach full charge before use. This will take approximately 1.5
hours if the battery was completely drained.
PAIRING YOUR EARBUDS
How to pair both of your Dripz earbuds at once: Once the Dripz
earbuds are fully charged, remove the earbuds from their
charging case. The LED light on one earbud will flash white and
PRODUCT FEATURES
• IPX7 waterproof rating
• Up to 5 hours of audio playtime
• Built-in microphone
• Wireless functionality with a range of 33 ft (10 m)
• Compatible with smartphones and other media devices
• Built-in rechargeable battery
• Comes with a magnetic closure carrying case
the other will be solid white. Turn on the wireless pairing settings
on your smartphone, tablet, or computer and select the device
labeled "Dripz". Once Dripz earbuds are paired, the LED light on
both earbuds will be solid white. Once your device is connected,
the earbuds will pair automatically upon future use and stay
paired until you manually disconnect it.
If the earbuds are turned off, press and hold the multi-function
buttons for 2 seconds until you see the LED light turns on.
How to pair just one single earbud: Remove one Dripz earbud
from the charging case. Wait for the LED light on that earbud to
flash white and then connect to your device's wireless pairing
settings as described earlier.
HOW TO RESET THE EARBUDS
Press and hold the multi-function buttons for 8 seconds until the
Dripz earbuds turn on.