Summary of Contents for AIS AutoChlor SM30
- Page 1 SALT WATER CHLORINATION INSTRUCTION MANUAL SYSTEM MODELS: SM30, SM20 AUTOMATIC CELL CLEANING EXPLANATIONS OF FUNCTIONS OF POWER SUPPLY...
- Page 2 EXPLANATIONS OF FUNCTIONS OF POWER SUPPLY Single press of the button decreases chlorine (C1 ) production by 10%. In order to turn OFF the chlorinator it is necessary to press the button several times to make sure all Chlorine Production Indicators are OFF. Single press of the button increases C1 production by 10%.
- Page 3 CELL HOUSING INSTALLATION Caution: Cell must be installed correctly as per instructions: If installed O.K. incorrectly, cell housing could be damaged. O.K. O.K. gas trap no gas trap WATER BALANCE Water balance requirements: Salt 4000 ppm – 5000 ppm 7.2 – 7.4 Total Alkalinity 90 ppm –...
- Page 4 SPECIAL NOTE The chlorine production is regulated with the output control and daily running time. Your chlorinator manufactures chlorine at a constant rate (ie. the SM30 produces 30 grams of C1 per hour), and this is ideal for routine daily chlorination. If during peak use the pool water looses its sparkle and looks “tired”, it probably needs to be “shocked”...
Need help?
Do you have a question about the AutoChlor SM30 and is the answer not in the manual?
Questions and answers