Page 1
Set-up 1. Insert your Bye Bye Standby socket into an electrical mains socket. 2. Each socket must be set-up with a remote before it can be used. To set-up your socket with your remote control press and hold the OFF button on the socket. The LED on the socket will flash once every second indicating that it is ready to be set-up.
Page 2
Before you can use your socket, you must set it up. See overleaf for details. 4. To use, plug the device that you would like to control into your Bye Bye Standby socket and press the green button to activate standby mode and the red button to take your appliance off standby.