HELIX XI6 Installation Manual page 9

1. Plug your terminal.
Connect the HDMI cable to your terminal's HDMI port and
to the HDMI port of your TV.
Connect the power pack to your terminal and plug it into a
power outlet that is not controlled by a dimmer or wall switch.
The light on your terminal will blink.
Do not use any power pack other than
the one provided with your terminal.
ALIM/POWER
HDMI
16
TV
INPUT
ETH
ALIM/POWER
2. Turn on your TV.
Turn on your TV with the TV remote
and select the correct HDMI source.
3. Remove the tab.
Remove the plastic tab on the back
of the voice remote.
4. Follow the instructions on your screen.
Your terminal will automatically connect to the Wi-Fi network.
Follow the instructions on your screen to configure your terminal
and voice remote.
If the terminal fails to connect automatically, connect manually following
the instructions on the screen.
Your Helix TV terminal and voice remote
are now working!
PULL
17