Arranging The Cables; About Connector Covers - Uniden TL27WRA-W Owner's Manual

Connecting Other Equipment (cont'd)
Arranging the cables
Pass the cable through the notch in the cover.
(The cover can also be removed.)
About connector covers
• Removal
Press down
Pull this way.
27 and 32 inch models:
Press down on the lip at the top and pull
towards you to remove it.
• Installation
27 and 32 inch models:
Insert the two protrusions at the
bottom into the holes on the body,
and press in the top until it is locked
in place. Next, press in the center
section to lock the protrusions on the
left and right.
* Take care not to pinch the cords.
22
here.
cover tabs
37 and 42 inch models:
Press on the two tabs on the right and pull
towards you to remove it.
cover tabs
37 and 42 inch models:
Align the three tabs on the left into the
holes on the body and press the into the
left side until it is locked in place. Next,
press the right section to lock in the right
side tabs.