Contents SUMOSPACE QUICK START GUIDE Safety Product Elements Installation Display Panel Network Connector Panel Yoke Mount Lenses Technical Specifications August 2018...
Page 3
SAFETY WARNINGS CAUTION! Operate the SUMOSPACE ONLY with the covers or lenses installed in front of the LEDs. Do not connect the SUMOSPACE Power Supply to the mains when the covers or lenses are removed. Risk of electric shock! Caution, high light intensity. Do not look directly into the LEDs. The LEDs are classified Risk Class I for blue light radiation.
Switch on the Power Switch (11) on the Power Supply (10) 16. Power Connector You can now control the SUMOSPACE with the Display Panel (8) on the fixture or externally over DMX/RDM over standard DMX cable or over LAN and Wi-Fi.
DISPLAY PANEL Display Key Functions Function Standby; LEDs OFF; ______________________________________________________________________________________________ Set 5 / 50 digits down ______________________________________________________________________________________________ Set 1 / 5 digit down ______________________________________________________________________________________________ Set 5 / 50 digits up ______________________________________________________________________________________________ Set 1 / 5 digit up ______________________________________________________________________________________________ INTENSITY Key combination shortcuts. Press two Keys simultaneously. Function INTENSITY = 0 % ______________________________________________________________________________________________...
Page 7
Extended Functions Function If the Standby key is pressed for more than 5 seconds you > 5 sec. can toggle between Factory Default Settings (Signal LED GREEN) and last User Settings (Signal LED BLUE) ______________________________________________________________________________________________ Flash Erase; Display shows “FLASH ErASE”; All the user DMX ADDRESS parameters will be reverted back to the factory default values permanently...
Page 8
Signal LEDs Signal LED Functions Function DMX | LAN | WiFi • GREEN DMX Input is plugged. Incoming DMX data will be received. DMX overrides data over LAN/Wi-Fi. • RED DMX over LAN; DMX Input is unplugged. Incoming DMX data over LAN Network.
NETWORK CONNECTOR PANEL The Network Connector Panel (7) offers besides the Display Panel many additional options to control the SUMOSPACE and readout important parameter like temperature and working hours of the fixture. WIFI DMX IN DMX OUT Connector Function Wi-Fi USB Port with Wi-Fi Dongle.
YOKE MOUNT The Yoke Mount is attached from the back side of the SUMOSPACE fixture with two 3/8” thumb screws. To mount it first align the guiding pins on the inner side of the Yoke Mount with the sliding bars in the corners of the fixture.
TECHNICAL SPECIFICATIONS SUMOSPACE Lighting Fixture Weight 5.4 kg (12 lbs) ______________________________________________________________________________________________ DC Input Voltage 400 V DC ______________________________________________________________________________________________ Input Power Max. 400 W ______________________________________________________________________________________________ Beam Angle 30°, 60° and 120° (without lenses) ______________________________________________________________________________________________ Color Range 2800 - 6500 K ______________________________________________________________________________________________...
Page 12
Dimensions SUMOSPACE fixture with Yoke Mount Dimensions Power Supply August 2018...
Page 13
SUMOLIGHT GMBH BERLIN TEL +49 30 3389 2987 INFO@SUMOLIGHT.COM MADE IN GERMANY | SUMOLIGHT.COM August 2018...
Need help?
Do you have a question about the SUMOSPACE and is the answer not in the manual?
Questions and answers