Advertisement
BASIC
accordingly.The frequency starts from 87.5MHz to
108MHz and skips at every 0 .1 MHz in scanning
process. Once catching a station , it stops a second
and store it , then continues the auto-scanning.
When it scans from 87.5MHz to 108MHz, it will
stop scan automactically. Press"
select the station.
Press"
" to put AUX IN on,
"
" appears on the LCD dis-
play. Pug in the 3.5mm audio
cable into the AUX IN jack.
Play music now.
8
Back-up the lithium battery
The 3.7V lithium battery is to retain the clock/alarm
in case of a power failure. It can not display the
alarm/clock time when battery is low,need charge.
" or "
"to
Infrared remote control(Option)
Install the battery: Unscrew the back cover of
the remote control, open the screws, install 3
pieces AAA battery, lock the screw and screw the
back cover.
Sync time with phone: Unscrew the back cover
of the remote control, connect the remote
control's lightning connector to the iPhone
interface. In this way, the time will be synced with
iPhone.
Sync time with the reomte control: Align the
remote control with the alarm screen,press the
sync button on the remote control, the time of the
remote control will be transmitted to the alarm
clock and turn off the alarm, reset the alarm.
Advertisement
