Galaxy DX5 Calibration And Maintenance page 15

2. Clean Option:
1) Click to set the carriage go back to the flash jetting position for jetting during printing;
2) Print pass is to set every XX pass, carriage go back to the flash jetting position for jetting;
3) Clean Mode is Flash Jetting;
4) There are three options in Clean Time, Fast means non-stop jetting, Normal means jetting for 0.5s,
, Long means jetting for 1s.
3. Eclosion(Feather function):
To blur the pass line, feather pass edge.
1) Option: Enable/Disable the feather function; 2) Type of Eclosion; 3) Value of Eclosion.
4. Color Bar:
1) Distance (mm): Setup for distance between the color bar and the picture;
2) Width (mm): Setup for the width of the whole color bars ;
3) Setup for the position of color bar (in the right/left/both side of the image ).
5. Smart Print:
Set up for automatically skip white.
6. Auto feed after printed:
Set up for automatically feed media after printing(mm).
15