Download Print this page

Incy Interiors Sophia 2305 Assembly Instructions Manual

Cot

Advertisement

Quick Links

Australia Item #: 2305
Made in Taiwan for:
Incy Interiors Pty Ltd
2a Piper Street, Bathurst, NSW, 2795
AUSTRALIA
(02) 9412 3884
www.incyinteriors.com.au
Sophia Cot
*Shown with mattress (sold separately)
Designed and Distributed in Australia by:
Incy Interiors Pty Ltd
2a Piper Street, Bathurst, NSW, 2795
AUSTRALIA
(02) 9412 3884
www.incyinteriors.com.au
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sophia 2305 and is the answer not in the manual?

Questions and answers

Summary of Contents for Incy Interiors Sophia 2305

  • Page 1 Australia Item #: 2305 *Shown with mattress (sold separately) Made in Taiwan for: Designed and Distributed in Australia by: Incy Interiors Pty Ltd Incy Interiors Pty Ltd 2a Piper Street, Bathurst, NSW, 2795 2a Piper Street, Bathurst, NSW, 2795 AUSTRALIA...
  • Page 2  Before each usage or assembly, inspect cot for damaged hardware, Loose joints, missing parts or sharp edges. Do not use cot if any parts are missing or broken. Ask your dealer or contact incy interiors for replacement parts and instructional literature if needed. Do not substitute parts.
  • Page 3: Care And Maintenance

     Regularly check that all assembly fittings are always tightened properly and retighten as necessary. After Sales Customer Service When you receive your Incy Interiors product, if you need any assistance or if you have any comments with respect to any aspect of the goods, please contact your local distributor via email.
  • Page 4: Parts List

    Parts list (F) Metal dowel x 4pcs pieces...
  • Page 5 Assembly Instructions Tools Necessary: Allen Key (included) NOTE: It may be easier to assemble product with two people. NOTE: When inserting bolts, turn clockwise until tight. Then loosen off a turn. After cot is completely assembled, return to each bolt and tighten. 1.
  • Page 6 4. Attach fixing flats (part 5) to the mattress frame/base with screws (part E) IMPORTANT NOTE: These are only to be used when the mattress frame/base is set on level 1 5. Slide mattress frame/base (part 3) into both cot ends at the preferred mattress height 6.