Table of Contents
Advertisement
If you have Call Waiting service and a call waiting tone sounds while
you are on a call, press talk/flash (or flash on the base) to accept
the waiting call. There is a short pause, then you will hear the new
caller. To return to the original caller, press talk/flash (or flash on
the base) again.
The New Message LED on the handset is designed to work with your
answering system. The LED flashes when you have new messages in
your answering system.
The LED stops flashing when all new messages are played back (see
"Using your Answering System" on page 47).
You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
B A S I C S
[ 25 ]
Advertisement
Table of Contents
