Table of Contents
Advertisement
CHAPTER 4
PARAMETER
COMMAND, COMMENT
Open Lcp File
Opens standard light curve
program file optimized for
various types of samples.
Clock
Starts or stops the repetitive
trigger.
Clock Time
Sets or modifies clock inter-
val.
Clock Mode=
Selects the action to be trig-
gered by the clock. Note that
the drop-down list for trig-
gered events differ between
the SP-Analysis and Fast
Acquisition modes.
eSP Mode
In the eSP mode the Fm'
value is calculated on the
basis of the O-I1 amplitude
Stirrer
Switches stirrer on/off. Stir-
ring is only brought in
standby mode by the stirrer
switch on the front panel of
the control unit.
Measure Zoff
Measures zero offset for all
List
measuring light colors at
current gain setting.
98
PAMWIN-3 ADVANCED LEVEL
INPUT
File name
Check/uncheck
Clock interval in s (=s).
Increment in s to decrease
(-s) or increase (+s) the
current clock interval
Select from drop-down list
Checked is on/unchecked
is off
Check on/off
None
Advertisement
Table of Contents
