Advertisement
Quick Links
READ ME FIRST!
LED3-3040C-A, CS-A
LED3-3040XC-A, XS-A
1.
Unscrew the stock brake light. Keep
screws for Step 10.
4.
From IPCW's MEGA 3rd Brake Light,
unscrew 2 screws from each side of the
LED light bar. Keep screws for
Step 14.
7.
Wipe clean vehicle's 3rd brake light
area with slightly damp cloth.
10.
Screw on the chrome base using
original screws kept in Step 1.
Installation Instructions
L.E.D. MEGA 3RD BRAKE LIGHT
2007-UP SILVERADO / SIERRA
2.
Unplug stock connector from the light.
5.
Unscrew 2 more screws from the
bottom of LED light bar. Keep
screws for Step 15.
8.
Do not peel off paper backing
from bottom of chrome base.
We do not recommend taping
the light to vehicle as the
adhesive might damage body
paint when you try to remove it.
11.
Insert the clips on top of LED light bar
to chrome base.
3.
Remove stock light.
6.
Separate LED light bar from chrome
base. Plug in stock connector and
test to make sure all functions
work properly before installing
it. Then unplug it.
9.
Put the chrome base on vehicle by
aiming its screw holes to vehicle's stock
light screw holes making sure they line
up.
12.
Plug in the stock connector from vehicle
to MEGA Light connector.
Advertisement
Summary of Contents for Crystal Eyes LED3-3040C-A
- Page 1 READ ME FIRST! Installation Instructions LED3-3040C-A, CS-A L.E.D. MEGA 3RD BRAKE LIGHT LED3-3040XC-A, XS-A 2007-UP SILVERADO / SIERRA Unscrew the stock brake light. Keep Unplug stock connector from the light. Remove stock light. screws for Step 10. From IPCW's MEGA 3rd Brake Light,...
- Page 2 Close down LED light bar and click its Screw on light bar to chrome base Screw on bottom of LED light bar to bottom into chrome base. Make sure it using screws kept from Step 4. chrome base using screws kept from is secured.
Need help?
Do you have a question about the LED3-3040C-A and is the answer not in the manual?
Questions and answers