Advertisement
Quick Links
Advertisement
Summary of Contents for Banks Outdoors FEEDBANK 40
- Page 1 INSTRUCTION MANUAL...
-
Page 2: Limited Lifetime Warranty
(shipping charges not included) for life, once the product has been registered with Banks Outdoors, in the event of a defect in materials or workmanship occurring during normal use. The warranty only extends to the original retail purchaser named on the product registration. - Page 3 CONGRATULATIONS ON PURCHASING YOUR NEW BANKS PRODUCT! Implementing a solid feeding program has never been easier with Banks Outdoors’ gravity-fed Feedbank deer feeders. The single post design of this feeder allows big bucks to feed unhampered and unharmed by legs getting in the way. These...
- Page 4 FEEDBANK 40 INCLUDED PARTS: (1) Feeder (1) Steel Strap (1) Camo Strap (2) Feed Ports (2) 1/4-20” Bolts (6) 1/4” Lock Washers (4) Fender Washers (4) T-Style Thumb Bolts (1) Cover 1. Unpack the Feedbank from the box. 2. Place the cover on the feeder so that the name reads forward.
- Page 5 5. Attach camo strap around the steel strap and attach the Feedbank to your desired post or tree. 6. Feedbank 40 can attach to a tree, fence post or t-post. 7. Fill with feed. All feed ports slide in and out when t-style thumb bolt is loosened, to control flow.
- Page 6 1” Bolt. Then, place the 1/4-20” Lock Washer onto the bolt. To fasten all together, place the 1/4-20” Wing Nut on the bolt and tighten to a snug fit. Repeat this step for each attachment hole on the feeder. BANKS OUTDOORS...
- Page 7 FEEDBANK 150 4. After the cover and Feed Ports are installed, you need to purchase an 8’ 4x4 green-treated post. Dig into the ground 4’ and backfill the post so it is level. 5. Slide Feedbank over the post. 6. Another option is to cut off a tree and slide it over a trunk of the stree - just be sure to cut it off level, leaving 4’...
- Page 8 Do the same thing to the second bolt for that feed port. Repeat this for all ports. BANKS OUTDOORS...
- Page 9 FEEDBANK 300 4. After the cover and Feeder Ports are installed, you need to purchase an 8’ 4x4 green-treated post. Dig into the ground 3’ and backfill the post so it is level. 5. Slide Feedbank over the post. 6. Another option is to cut off a tree and slide it over a trunk of the stree - just be sure to cut it off level.
- Page 10 Do the same thing to the second bolt for that feed port. Repeat this for all ports. BANKS OUTDOORS...
- Page 11 FEEDBANK 600 4. After the cover and Feeder Ports are installed, you need to purchase an 8’ 6x6 green-treated post. Dig into the ground 3’ and backfill the post so it is level. 5. Slide Feedbank over the post. 6. Another option is to cut off a tree and slide it over a trunk of the stree - just be sure to cut it off level.
- Page 12 6. Allow water to fill into the trough until it automatically shuts itself off. Water should not overflow the trough. If water does proceed over the top of the trough, verfiy that the trough is level. 7. Install the float valve protection cover with the (4) 1 3/4” bolts. BANKS OUTDOORS...
- Page 13 WILD WATER® 300 INCLUDED PARTS: (2) 3’ Trough (s) (1) 300 Gallon Tank (1) 2” Plug (2) Float Valves (2) Float Valve Protection Covers (8) 1 3/4” Cover Bolts 1. Set your troughs on level ground. 2. Set your tank on level ground over the top of the troughs. 3.
- Page 14 1. Attach hose and shut-off valve to the outlet hole on your Wild Water. 2. Make sure valve is in shut-off position and fill your 100 gallon tank. 3. Remove plug on top of the Wild Water and insert hose into the opening. 4. Open valve and fill Wild Water. BANKS OUTDOORS...
- Page 15 WILD WATER® BLADDER INCLUDED PARTS: (1) Bladder (1) Hose (1) Shut-off Valve (1) Screw-on Cover 1. Attach hose and shut-off valve to the outlet hole on the Bladder. 2. Make sure valve is in shut-off position and fill Bladder. 3. Remove plug on top of the Wild Water and insert hose into the opening.
- Page 16 COMPANY INFORMATION 2020 31785 64TH AVE CANNON FALLS, MN 55009 1-800-262-4129 W W W . B A N K S O U T D O O R S . C O M...