Advertisement
Table of Contents
RESEARCH&DEVELOPMENT OF AMERICA, INC.
5420 DANIELS STREET STE A, CHINO CA., 91710 · (800)634-9166 · (909)628-4722 · FACSIMILE (909)591-2198
www.yoshimura-rd.com
FENDER ELIMINATOR KIT
070BG126501
Honda CBR650F
THIS PRODUCT IS NOT DOT APPROVED.
Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the
!
!
Installation of this product. Check with local laws and regulations for compliance prior to
installation and use. This product is not intended for use on public highways.
Advertisement
Table of Contents
Related Manuals for Yoshimura 070BG126501
Summary of Contents for Yoshimura 070BG126501
- Page 1 Honda CBR650F THIS PRODUCT IS NOT DOT APPROVED. Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the installation of this product. Check with local laws and regulations for compliance prior to installation and use. This product is not intended for use on public highways.
- Page 2 6mm x 14mm Button Head Screw BN-SSS-22-18 Butt Connectors ZT-300 Cable Ties 17029 Yoshimura Sticker Sheet Optional Parts 070BGUNVTBKT Universal Turn Signal Bracket Kit *** The Yoshimura Universal Turn Signal Bracket Kit is to be used with aftermarket stud-mounted turn signals and is sold separately.
- Page 3 3. Install (No. 3) 12200-FEBKT, Yoshimura license Removal plate bracket onto (No. 2) 12650-FEBKT2, fender eliminator bracket using (No. 11) 1. Remove passenger seat. M6X10BHS, 6mm screws as shown below. 2. Disconnect the license plate light and turn signal wires.
- Page 4 6. Install (No. 6,7) 12650-TSB-L/R, left and right turn signal brackets and (No. 5) 070BG-LPF, license plate frame using (No. 10, 17) M6X16BHS & M6X14BHS, 6mm screws, (No. 15) 6MMWASHER, washers, and (No. 16) 6MMLN, nuts as shown below. 7. Route license plate light and turn signal wires through hole in (No.
Need help?
Do you have a question about the 070BG126501 and is the answer not in the manual?
Questions and answers