ION Solar Stone Quick Start Manual page 4

Features
Back Panel
1. Power: Hold this button to power
Solar Stone on and off.
2. Bluetooth Connect: Press this button
briefly to begin Bluetooth connecting.
Note: Solar Stone will automatically
power off after 30 minutes if no audio
is playing.
3. Link: Press this button to link two
Solar Stone units together.
4. Charging Adapter Input: Insert the included charging adapter here to charge the Solar
Stone battery.
Solar Stone should be fully charged prior to first use for maximum battery life. Once fully
charged, Solar Stone's solar panel can provide suitable power for typical daily use
without the need to connect the charging adapter. Results will vary depending on daily
number of hours Solar Stone is exposed to direct sunlight.
5. Reset: If Solar Stone is working abnormally,
into the Reset hole located on the bottom of
turns off. Try this only after you have first attempted to reboot
power button.
6. Charging LED: This LED is solid red when the battery is charging and turns off when the
battery is fully charged/no adapter is connected.
7. Bluetooth LED: This LED slowly blinks blue when the speaker is powered on, blinks fast
while Bluetooth searching, and is solid when Bluetooth connected.
8. Link LED: This LED blinks fast when searching for another Solar Stone and is solid when
linked to another Solar Stone.
4
6 7
1
2
shutdown the unit by placing a paperclip
Solar Stone, and gently push until the unit
8
4 5
LINK
3
Solar Stone using the