Pro Co Sound TradeTools MS3 Application Information

MIC INPUT OF MIXING CONSOLE
PHANTOM POWER (IF REQUIRED)
MUST BE PROVIDED BY CONSOLE
CONNECTED TO DIRECT OUTPUT.
SIGNAL SOURCE
LOW-IMPEDANCE MICROPHONE
DIRECT BOX OUTPUT
CONTROLS:
INPUT:
Female 3-pin XLR-type connector accepts signal from low-
impedance (150 ohm nominal) microphone or similar source.
Input impedance (with 1.0 kohm loads on DIRECT and both
ISOLATED OUTPUTS): approx. 500 ohm.
DIRECT OUTPUT:
Male 3-pin XLR-type connector wired in parallel with INPUT
provides signal to feed mixer input.
Pro Co Sound
225 Parsons Street | Kalamazoo, MI 49007
800-253-7360
APPLICATION INFORMATION
XLR FEMALES
MICROPHONE CABLE
XLR MALE XLR FEMALE
ISO OUTPUTS:
Male 3-pin XLR-type connectors provide floating
transformer-isolated low-impedance outputs to feed mixer
inputs. Recommended load impedances: 1.0 kohm.
GND/LIFT:
GND position connects pin 1 of INPUT/DIRECT OUTPUT to
pin 1 of ISOLATED OUTPUT. LIFT position "floats" ISOLATED
OUTPUT. Used to reduce hum and buzz by eliminating
ground loops and providing proper grounding for various
conditions.
MS3
MICROPHONE SPLITTER
MIC INPUT OF MIXING CONSOLE
SIGNAL PATH
(Balanced)
MIC INPUT OF MIXING CONSOLE
www.procosound.com
»