Advertisement
3.0 Mounting of the display unit.
3.1 The Bridge Box can be flush mounted by cutting a hole in the mounting surface. The unit can then be mounted using the
four M4 nuts and bolts provided.
3.2 The Bridge Box unit can be used with the trunnion mount adjustable bracket that it comes fitted to. It can be fixed either
above head height facing down or below head height facing up.
3.3 In either case the display
should be mounted on a
smooth and stable surface.
The back of this unit has to be
accessible for power supply
and RF antenna connectors.
Ensure that there are no
other vulnerable elements
within the mounting surface
(e.g. electric cables, gas pipes
or water pipes).
Overall height 175mm
Back section depth 55mm
Width of bracket base 195mm
Total width including hand wheels
260mm
6
210mm
width
146mm
height
height
Advertisement
