Download Print this page

Tyler Middle Mount II Setup Manual page 3

Gyro-assist for film or video cameras

Advertisement

N
OTES
FILM CAMERA REQUIREMENTS
• Compatible cameras: Arriflex 35-3 435, 16/SR-2 & 3 and 16/SR-2 & 3 Hi-Speed.
• 400' magazine.
• Round filter and shade system - Suggested filter size: 138mm round.
BROADCAST VIDEO CAMERA NOTES
• To ensure there is no noise being picked up from the gyros, make a test recording (with gyros on)
and play back. Also, have pilot "key" the helicopter radio to make sure it is not causing any interfer-
ance with the recording.
POWER (F/V)
• When utilizing the helicopter to power the Gyro Assist (instead of a battery pack), the maxi-
mum current draw is not to excede 28 volts / 400 watts (@ 15 amps).
• The average current draw is approximately 3 amps.
• Suggested power input range: 24 to 28 VDC
Page 1 of 6

Advertisement

loading