Advertisement
Rechargeable COB LED flood light
Assembly
(1) Loosen the knobs either side of the head unit and fold down
the bracket. Tighten knobss to secure in position.
(2) Remove the fixing bolt from the base.
(3) Attach the head unit to the base by passing the bolt through
the centre hole in the bracket and screwing it into the base.
Important before use
(1) Fully charge the flood light using the mains adaptor (instructions overleaf)
Directions for use
(1) Press the switch under the head unit to turn the light on and off.
(2) The angle of the light can be adjusted by loosening the knobs
either side of the head unit and tilting to your chosen angle.
Tighten the knobs to secure in position.
Model: 63957
Operating instructions
Please turn over
Advertisement
Table of Contents
Summary of Contents for Uni-Com 63957
- Page 1 Rechargeable COB LED flood light Model: 63957 Operating instructions Assembly (1) Loosen the knobs either side of the head unit and fold down the bracket. Tighten knobss to secure in position. (2) Remove the fixing bolt from the base. (3) Attach the head unit to the base by passing the bolt through the centre hole in the bracket and screwing it into the base.
- Page 2 This product is guaranteed for one year from the date of purchase against faulty parts or workmanship. It does not cover physical damage to the unit. Proof of purchase required. This does not affect your statutory rights. Uni-Com (Global) Ltd. +44 (0)1732 865238 1 &...
Need help?
Do you have a question about the 63957 and is the answer not in the manual?
Questions and answers