Browsing A Single Picture; Changing Aspect Ratio - Proline PL-DPF 804B User Manual

Browsing a single picture

You can select a single picture to display on the screen, without a slideshow.
1. Select a picture in the thumbnail view, and press the [OK] button. The selected picture is displayed on the full screen.
To view the previous or next photo, press the [ ] or [ ] or [
To rotate a picture, press the [ ] or [ ] button.
To magnify a picture up to 16X, press the [
view the other part of the picture.
2. To return to the thumbnail view, press the [ ] button.
3. To start slide show from the current picture, press the [OK] button.

Changing aspect ratio

While browsing a picture or watching a slideshow, you can press the [4:3/16:9] button to change the aspect ratio of pictures.
4:3: When you select this, the pictures in 16:9 or above ratio are displayed in full screen, but some parts on the left and right are cut off.
16:9: When you select this, the pictures in 16:9 or above ratio are displayed in original size, with black belts on the top or bottom.
Note:
The picture in 4:3 aspect ratio can only be displayed in 4:3. The picture always appears in 4:3 full screen regardless of your selection.
This function does not work for a picture with resolution less than 800*600.
] button repeatedly. When a picture is magnified, press the [ ], [ ], [ ] or [ ] buttons to
Downloaded from www.vandenborre.be
] or [ ] button.
13