Advertisement
4.3.6.
Referring to fig.5, loosen screw 1c on the terminal block and
slide out the forked connector attached to wire 1b which
connects to element 1a.
4.3.7.
Referring to fig.5, loosen screw 2c on the terminal block and
slide out the forked connector attached to wire 2b
which connects to element 2a.
4.3.8.
disconnect the element wires at the other end of the heater in a
similar manner.
4.3.9.
each element can now be removed from it's clips.
4.3.10.
Insert a new element into the clips with the wire connections
facing downwards.
4.3.11.
Reconnect each element to the terminal blocks making
reference to fig.5.
4.3.12.
Refit the endplate with the switches attached ensuring that no
wires are trapped or showing.
4.3.13.
Refit the plain endplate ensuring that no wires are trapped or
showing.
4.3.14.
Refit the grille and check that the heater is functioning correctly before placing it back into service.
5. OPeratIOn
note:
The infrared lamp is fragile and therefore it is important that it is not subjected to any unnecessary shocks or vibration and is not
moved when it is on.
WarnInG! ensure you have read, understood and applied the safety instructions in section 1 before using the heater.
‰
5.1.
Position the heater at least 1m from any object.
5.2.
Plug in the heater and switch on.
5.3.
Model lP3000 has two heats settings:
- one button switched on initiates the low heat setting.
- Two buttons switched on initiates the high heat setting.
5.4.
When the heater is no longer required, switch off and/or unplug the unit.
5.5.
Allow heater to cool after use before attempting any maintenance or relocation.
WarnInG! dO nOt touch the heater when in use as it becomes hot.
‰
enVIrOnMent PrOteCtIOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee reGuLatIOns
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk business Park, bury st edmunds, suffolk. IP32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
fig.5
lP1500.V2 LP3000 Issue 4 (HF) 14/11/18
www.sealey.co.uk
Advertisement
