Charging Your Hearing Aids - NuEar Circa Edge AI Quick Start Manual

Charging Your Hearing Aids

Charging Your Hearing Aids
• Place your hearing aids in the charger with Place your hearing aids in the charger with
the faceplate facing downward so battery
contacts on hearing aid align with charging posts
within charger.
• Your hearing aids will turn off automatically
and begin to charge.
• Note: The LEDs corresponding to each
hearing aid:
– Glowing Green = Charging
– Solid Green = Fully Charged
– Blinking Red = Fault State. To reset, remove
the hearing aids from charger, wait until LED
turns off and re-insert aids. If Fault State
continues, call your hearing professional.
4
• When charging without the charger cord, the LEDs turn
off when the hearing aids are fully charged to preserve
the on-board battery.
• Charging occurs with the lid open or closed; hearing
aids will be fully charged in under 3 1/2 hours.
• It is safe to store hearing aids in the charger after they
are fully charged and any time that you are not wearing
them.
• Hearing aids will automatically power on when
removed from the charger.
• To illuminate LEDs when the charger is not plugged in,
remove a hearing aid from its charging post for three
seconds and then reinsert it. LEDs illuminate for 10
seconds before turning off.
• If you will not be wearing your hearing aids for an
extended period of time (i.e, weeks), remove both the
plug from the charger and the hearing aids from the
charging posts. You will need to manually power off
the hearing aids by pressing the user control on each
hearing aid for three seconds.
5