MORDOMUS iSND8 Quick Start Manual

1. GENERAL FEATURES:
Control outputs: 8 independent outputs in volume and audio
source;
Audio inputs: 3 generic inputs (A, B e C), 8 dedicated inputs,
audio bypass for channel A, B and C;
Control: MDiBus;
Applications: Surround sound, alarm, video door phone,
doorbell, audible warnings and panic alarms;
Installation: DIN rail distribution board or fastening by 4 non-
standard screws.
2. GENERAL SPECIFICATIONS:
Voltage: 15VDC;
Consumption: 6A @ 15VDC;
Storage Temperature: -10ºC to 60ºC;
Operating Temperature: 10ºC to 50ºC;
Maximum humidity: 80% non-condensing;
Speaker Impedance: 4-32Ohm;
Output power per channel: 10W R.M.S.@8Ohms (15VDC);
Internal protection: Fuse 6A T.
Physical Specifications:
Dimensions: 154mm X 110mm X 60mm DIN rail mounting (9
modules);
Level of Protection: IP20, for indoor use.
Self-extinguishing plastic box UL-94 V0;
Directives:
- Electromagnetic Compatibility Directive / EMC
Directive 2004/108/EC
3. COMPATIBILITY:
Compatibility with iThink
Compatibility with Mordomus software: Mordomus iThink
V2017 or higher.
4. SECURITY:
Before making any
instructions carefully.
Never remove the plastic base from DIN rail.
Manual: iSND8-1722-EN
iSND8 – Surround sound module
module: V1.0
connections, please read
5. CONNECTIONS:
Conductors Cross Section:
Speakers circuit: Multi-wire Max 2.5mm²
Circuit MDiBus + Power Supply: Cable CAT 6 UTP;
Never connect feeders with output other than 15V 6A.
The use of a low cross section cable causes voltage
drops that could lead the module into protection mode
caused insufficient supply voltage.
Connections table:
Nr
1 Output Sound 1 (+)
2 Output Sound 1 (-)
3 Output Sound 2 (+)
4 Output Sound 2 (-)
5 Output Sound 3 (+)
6 Output Sound 3 (-)
7 Output Sound 4 (+)
8 Output Sound 4 (-)
9 Output Sound 5 (+)
10 Output Sound 5 (-)
11 Output Sound 6 (+)
12 Output Sound 6 (-)
13 Output Sound 7 (+)
14 Output Sound 7 (-)
or higher.
15 Output Sound 8 (+)
16 Output Sound 8 (-)
these
www.mordomus.com
Function Nr
PA
PB
In A + B
Out A + B Output Channel A+B
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
In C
Hardware: V1
Firmware: V1
Version: V1.1
Function
Gain Channel A
Gain Channel B
Input Channel A+B
Input Channel i1
Input Channel i2
Input Channel i3
Input Channel i4
Input Channel i5
Input Channel i6
Input Channel i7
Input Channel i8
Input Channel C
Pág.1/3