Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for AndyMark Linear Servo
- Page 1 Linear Servo Shifter Assembly/Mount Guide www.andymark.com...
- Page 2 Linear Servo Assembly/Mount Step 1: Attach the Slide Block to the Servo Bracket using two 10-32 Phillips Step 4: Attach and tighten four sets of Head Screws. 8-32 Screws with their respective Nylon Nuts to set the Servo in place.
- Page 3 Step 7: Slide and push the Slide Rack onto the Slide Block, rotating the gear Step 9: Slide the ¼”-28 Screw through while pushing into position. the Slide Rack and place the Rubber O- Ring on the other side. www.andymark.com...
- Page 4 Step 10: Line the Servo Shifter holes up to the Motor Plate and attach using two 10-32 Phillips Head Screws. Step 11: Screw the ¼”-28 Screw with the Rubber O-Ring into the Shifter block. www.andymark.com...
Need help?
Do you have a question about the Linear Servo and is the answer not in the manual?
Questions and answers