Winsome house WHSL472 Instruction Manual

Product Name: 3D Geometric Design Solar Light Stake
SKU #: WHSL472
Thank you for purchasing this Winsome House product. This product has been manufactured with the
highest standards of safety and quality.

Instructions:


First assemble the solar light. Make sure that the solar panel is facing up.

The on/off switch is located on the underside of the solar panel. To use, turn the on/off switch to the on
position.

For best results, allow to charge in direct sunlight for a minimum of 8 hours.

After fully charged, product will automatically light at night when turned on.

To extend battery life, turn to the off position when not in use.

To replace the battery, use a screwdriver to unscrew the bottom panel from the solar light. Replace
rechargeable battery with the same type of battery.

Battery: Rechargeable AAA Ni-Mh 200mAh 1.2V 1pc (included)
Instruction Manual
Please save this manual for future reference.