VERVIEW 2.1. Sensor Overview The wireless sensors designed and manufactured by Radio Bridge provide full sensor to cloud solutions for Internet of Things (IoT) applications. The Honeywell 5800 to LoRaWAN Bridge translates wireless Honeywell sensor data to LoRaWAN payloads that can be interpreted by the end application.
Font / Icon Meaning Important notes Warnings and cautions 2.4. Part Numbers Table 3 Part Numbers Part Number Rating Wireless Region RBS306-HW5800-US Outdoor/Industrial LoRaWAN North America 3. T ECHNICAL PECIFICATIONS 3.1. Absolute Maximum Ratings Table 4 Absolute Maximum Ratings Parameter Rating...
If the standard Radio Bridge console (console.radiobridge.com) is not used, refer to this section to decode the device data and configure the device through downlink messages. 5.1. Common Messages There are common messages across all wireless devices that are defined in the document “Common Sensor Messages”...
5800 WAN B ONEYWELL RIDGE 5.2. Uplink Messages The uplink message (sensor to web application) specific to the bridge is defined in following table. The common uplink messages are not included in this section (see common messages document). Table 5 Uplink Message 0x17: Honeywell Sensor Event Bytes Description Honeywell Sensor ID (usually located on a sticker on the sensor)
(2) this device must accept any interference received, including interference that may cause undesired operation. Per FCC 15.21, Changes or modifications not expressly approved by Radio Bridge could void authority to operate the devices. Sigfox RBS101, RBS104, and RBS105 sensors FCC ID: 2APNUSFM10R2...
USTOMER UPPORT Radio Bridge offers free technical support at: https://support.radiobridge.com Radio Bridge also offers technical support plans and service packages to help our customers get the most out of their Radio Bridge products. 9. D ISCLAIMERS Information in this document is subject to change without notice and does not represent a commitment on the part of Radio Bridge.