Advertisement
Assembly & Installation Instructions:
Hanging Pedestal Power Supply
ACC-HPED-PWR-B
Included:
A
REMOVE DRAWER
1
Completely remove drawer
from main body of pedestal.
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
B
ID
Part Name
A
Hanging Pedestal Power Supply
B
Cable Clips
Required, Sold Separately:
Desk or Table
Hanging Pedestal
Tools Required:
#2 Phillips Screwdriver
Plastic Tab
Flip the plastic tab
on each side of
drawer to release
drawer from main
body (right tab
down, left tab up).
Qty
1
3
1 of 3
Advertisement
Table of Contents
Summary of Contents for Workrite Ergonomics ACC-HPED-PWR-B
- Page 1 REMOVE DRAWER Completely remove drawer from main body of pedestal. Plastic Tab Flip the plastic tab on each side of drawer to release drawer from main body (right tab down, left tab up). Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1 of 3...
- Page 2 Remove plate from Main Body by removing x2 Phillips screws Plate Main Body PLACING POWER SUPPLY Insert power supply in cutout and secure with x2 Phillips screws which were removed in Step 2 Power Supply 2 of 3 Workrite Ergonomics | 800.959.9675 www.workriteergo.com...
- Page 3 Secure power supply power cord along top of Main Body with cable clips Insert drawer back into Main Body Cable Clips KEEP CABLES AWAY FROM ANY MOVING PARTS Power Cord Drawer 1500453 Rev A 3 of 3 Workrite Ergonomics | 800.959.9675 www.workriteergo.com...
Need help?
Do you have a question about the ACC-HPED-PWR-B and is the answer not in the manual?
Questions and answers