Advertisement
Quick Links
SAFETY
ELECTRIC COUNTER TOP
Please take notice that the unit will still be too hot to handle immediately after
CONTACT GRILL
use.
The Contact Grill has a thermal cut-off safety device to avoid over heating.
If the power cord is damaged, it must be replaced by qualified technician.
MAINTENANCE
Be sure to always wash the grill plates after each use to remove any residue
that may have accumulated.
For cleaning cast iron plate, please use warm soapy water while still warm. Do
not use cold water on hot plate.
After cleaning, be sure the oil tray must be dry thoroughly before putting them
back to the unit.
Do not immerse completely in water or any liquid to clean.
The appliance is not to be cleaned with a water jet.
HELP
If the Omcan Contact Grill does not work, please check the following:
1.The power supply is correct and switched on.
2.The positions of switch and thermostat are correct.
USER'S GUIDE
Advertisement
Related Manuals for Omcan PA10176
Summary of Contents for Omcan PA10176
- Page 1 The appliance is not to be cleaned with a water jet. HELP If the Omcan Contact Grill does not work, please check the following: 1.The power supply is correct and switched on. 2.The positions of switch and thermostat are correct.
- Page 2 Lift the top grill plate, arrange food on the bottom plate and bring top plate back Take out the Omcan Contact Grill from the packaging and locate the unit on a down to make contact with food and begin cooking. If additional sandwiches are firm level surface.