Pre-Installation Information - Philips Ultinon Essential LED-HL Instructions Manual

2

Pre-installation Information

• Check to make sure that the inside diameter of the air-tight cover for your
lamp is at least 60 mm. If it is too small, there is risk of unsuccessful
installation of the heat sink.
3 Installation steps for lamps
• Remove the halogen bulb from the luminaire according to the user manual of
the vehicle.
Fig
ure-2
Min60mm
Figure-1
For H1, H3, H4, H7
4
For Fog, H11, HB3/HB4, HIR2