Table of Contents
Advertisement
16
English
Traveling with your Philips Sonicare
Charging with travel case (specific types only)
Note: Each of the first 14 brushings must be at
least 1 minute in length to properly move
through the Easy-start ramp-up cycle.
1 Place the handle in the charging travel case.
2 Connect the charging travel case to a UL
60950-1 and IEC 60950-1 Listed computer,
laptop, USB hub, USB receptacle, or wall
adapter.
3 The wall adapter you use with this product,
shall have an output marked Class 2 or the
limited power source (LPS) requirements
and compatible with the electrical ratings
marked on the travel case.
4 The battery indication flashes white until
your toothbrush is fully charged.
Important: The wall adapter must be a safe
extra low voltage source, compatible with the
electrical ratings marked on the device.
Important: Only toothbrush models HX9330,
HX9340, HX9350, HX9360, HX9370, HX939W,
HX939B, HX939P, HX939V, HX939L can be
charged in the travel case. Other products and
batteries are not compatible with the travel
case.
Note: It takes at least 24 hours to fully charge
your Philips Sonicare. You do not have to fully
Hide quick links:
Advertisement
Table of Contents
