The stand mixer is only to be connected to an AC supply (220-240V). The motor must always be switched off before the stand mixer is connected with the main supply. When the Homegear 3 in 1 is not in use always ensure that it is turned off and unplugged form •...
Page 6
Assembly Glass Jar 1. Mount the jar sealing ring onto the blade base then mount the blade base into the jar base tightening it until it is securely fixed (Photo 2). 2. Once the ingredients have been placed in the jar, fix the lid onto the jar by pushing it down until it is securely fastened (photo 3).
Page 7
Sausage Maker 1. Loosen the clamping ring and remove the grid and the blade. 2. Install the base and hold the funnel sausage on the chopping blade, then tighten the clamping ring. Pasta Maker 1. Remove the protective cap from the rotor axis chopper by turning to the left. 2.
Page 8
Instructions for usage Mixer 1. Add the required ingredients to the bowl and open the upper main body using the head –lift leaver (see fig 1 and 2). 2. Place the mixing bowl on the base and turn it in an anticlockwise direction until it is fixed into position (see fig 3).
Page 9
2. Ensure the dough is kneaded and softened, then split into equal parts and place it into the filling tube. 3. Turn the Homegear 3 in 1 to the 2 or 3 speed setting and push the dough through using the food pusher.
Page 10
2. After use allow the Homegear 3 in 1 to cool down before cleaning 3. When cleaning the interior and exterior of the Homegear 3 in 1 never use abrasive detergents or alcohol. 4. Whilst cleaning the Homegear 3 in 1 never submerge it in water.
Page 11
UK & Europe www.shop247.co.uk Units 3 & 4 Lower Park Farm Storrage Lane Alvechurch, Worcestershire B48 7ER United Kingdom Telephone: 01527 598388...
Need help?
Do you have a question about the DTHG-020B and is the answer not in the manual?
Questions and answers