Uniden Answering Machine User Manual page 44

Symptom
Severe noise interference.
The Caller ID does not display.
Handset No.1 or No.2
is not working.
" " message is
displayed on the LCD screen of
the handset.
The handset doesn't communicate
with the base or the other handset.
No 3-way conversation.
Voice Message Indication
does not work.
If you still have a problem.
[ 44 ] A D D I T I O N A L I N F O R M A T I O N
Suggestion
• Keep both handsets away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
• Charge the handset.
• Make sure the battery pack is connected to the handset and fully charged.
• Make sure the other handset is not already in use. Both handsets cannot be in
talk mode at the same time.
• Place the handset in the base for at least 5 seconds to re-register to the base.
• Make sure the handset is not too far from the base when trying to use.
• Re-register both handsets (see page 13).
• Make sure that you have registered the second handset.
• Only one handset at a time can talk with an outside caller. To allow the
other handset to talk to the caller, transfer the call.
• Contact your local telephone company to make sure that your telephone
receives FSK message signaling.
• Call our customer hotline at 1-800-297-1023.
www.uniden.com