Advertisement
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use.
WARNING:
Keep all objects at least 1 metre from the front and sides of
the appliance
Ensure the fan speed control is on the OFF position before plugging the power cord into the
socket.
Fan control
You can control your wall fan either with the remote control
or with the buttons on the control panel.
Press the "ON/SPEED" button. To start the fan at low speed.
Press the same button to choose between low, medium and
high speed.
Press "SWING" button to switch on the oscillation mode.
Press the "OFF" button to turn off the fan.
Timer
Press the "TIMER" button repeatedly to change the timer setting. The time increases in
increments of 0.5 hours and it has 4 time steps in total, which add up to set your desired timer
setting. The maximum timer setting is 7.5 hour.
For example, to set the time for 5 hours, press the timer button repeatedly until the indicator
lamps "1h" and "4h" are on at the same time.
Do not press timer button if you want to keep your fan operating manually.
The timer indicator lamps will not light up if the timer button is not pressed.
Remote Control
The remote requires a line-of-sight path to allow for the signal to be
received by the unit.
Position the unit so the receiver lens is visible from the remote control.
The symbols on the remote correspond to the symbols on the main unit.
Ensure batteries are inserted in the correct direction.
Do not mix battery types.
When replacing, ensure both batteries are changed simultaneously.
2 x AAA size batteries are required.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Advertisement
