Advertisement
Quick Links
SOLAR POST CAP
Phillips Screwdriver
1
Use a screwdriver to remove the battery cover
& connect the battery & separate light: NOTE:
Align the connectors before joining.
3
Mark holes on the post for both post cap and
separate light. Use an appropriate drill bit to
make a small pilot hole for the provided screws.
Mount at
desired
height
½" Hole for
wire &
connector
Small pilot holes for
mounting screws
Ultra Bright Tech
P.O. Box 414
105 W. Simon St.
Laotto, IN 46763
2
Ensure the silicone pad is under the battery cover
and reinstall the cover in place. Tighten all screws
to ensure a waterproof seal.
4
Use the provided screws to secure your solar
post light to the post.
Phone: 260‐918‐2758
Fax: 260‐918‐3540
E‐mail sales@ultrabrighttech.com
Web: www.ultrabrighttech.com
Phillips Screwdriver
Advertisement
Summary of Contents for ULTRA BRIGHT SOLAR POST CAP
- Page 1 SOLAR POST CAP Phillips Screwdriver Phillips Screwdriver Use a screwdriver to remove the battery cover Ensure the silicone pad is under the battery cover & connect the battery & separate light: NOTE: and reinstall the cover in place. Tighten all screws Align the connectors before joining. to ensure a waterproof seal. Mount at desired height ½” Hole for wire & connector Small pilot holes for mounting screws Mark holes on the post for both post cap and Use the provided screws to secure your solar separate light. Use an appropriate drill bit to post light to the post. make a small pilot hole for the provided screws. Ultra Bright Tech Phone: 260‐918‐2758 P.O. Box 414 Fax: 260‐918‐3540 105 W. Simon St. E‐mail sales@ultrabrighttech.com Laotto, IN 46763 Web: www.ultrabrighttech.com...
- Page 2 PRODUCT & WARRANTY REGISTRATION: Visit www.ultrabrighttech.com/registration Ultra Bright Technologies 1-Year Limited Warranty The retailer warrants the Solar Lights to be free from defects in workmanship and material present at time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.