Assembly Instructions (continued)
9
Operate WaveDrawer
CAUTION: Do not operate SkeeterVac
WaveDrawer
. Cover is only used when emptying or inspecting trap.
®
Place WaveDrawer
®
Cover
®
with WaveDrawer
cover on the
®
®
Cover
Outdoor LP Gas Mosquito Exterminator Model No. SV3100
Installing LP Gas Tank
To operate you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.
Insert LP Gas Tank
Place precision filled LP gas tank upright into hole in SkeeterVac
vapor withdrawal.
Place LP Gas Tank Cover
Place the LP gas tank cover onto the LP gas tank.
Connect LP Gas Tank
Before connecting, be sure that there is no debris caught in the
head of the LP gas tank, head of the regulator valve or in the
head of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it
stops.
Disconnect LP Gas Tank
Before disconnecting make sure the LP gas tank valve OFF.
Disconnect gas line to tank by turning knob counterclockwise
until it is loose.
Need a tank of gas? Try Blue Rhino
fast, safe, and available at tens of thousands of conveniently located retail
outlets nationwide. You can purchase a new full tank or exchange your
empty for a precision filled one.
Visit www.bluerhino.com for a location closest to you.
®
body so it is arranged for
tank exchange service. It's easy,
®