A computer, tablet, or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup (WPS) feature. There are three options for connecting the ADC-V523 to the Internet: Access Point (AP) mode, Wi-Fi Protected Setup (WPS) mode, and Ethernet mode.
Page 4
In the box • V523 camera • Mounting plate • Power supply • User guide • Wall anchors & screws (x2) Overview ❷ V523 topside ❶ V523 underside ❸ ❻ ❹ ❺ ❶ ❹ LED indicator MAC address + QR code ❷...
On the same device, open a web browser and enter “http:// v523install” in the URL field. Follow the on-screen instructions to add the ADC-V523 to the Wi-Fi network. The LED will be solid green when the connection is complete. Add the device to the account by either selecting the account in MobileTech or by using a web browser and entering the following URL: www.alarm.com/addcamera (you will need the customer’s...
Page 6
Add the device to the account by using a web browser and entering the following URL: www.alarm.com/addcamera (you • will need your user name and password. Select the camera from the video device list or type in its MAC • address to begin adding the camera.
LED reference guide • Power off • Solid green Connected to Alarm.com •••• Flashing green Local network connection •••• Flashing green+red Camera resetting to factory default • Solid red No local or Internet connection •••• Flashing red Power on, camera booting ••••...
Page 8
Notices Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the ADC-V523 and is the answer not in the manual?
Questions and answers