Table of Contents
Advertisement
Quick Links
aspenhome
ah
ITEM NO: I260-9133
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
I260-9133
HARDWARE LIST:
Description
No.
Bolt Ø1/4" x 3/4"
A
Bolt Ø1/4" x 1-1/4"
B
Lock Washer Ø1/4"
C
Flat Washer Ø1/4" x 5/8"
D
E
Allen Wrench 4mm
Hex Nut Ø5/16" x 1/2"
F
G
Hex Wrench 12mm
Lock Washer Ø5/16"
H
Flat Washer Ø5/16" x 5/8"
I
J
Shelf Bracket
K
Wood Screw #6 x 5/8"
L
Wood Screw #9 x 3/4"
STEP 1: Remove the drawer from the middle assembly: Fully extend the drawer, then press the
plastic tab down on the right and up on the left at the same time as shown below. While holding
the tabs pressed down/up, pull the drawer out.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
Page 1/4
R
Display Case
Quantity
Sketch
22 PCS
6 PCS
28 PCS
28 PCS
1 PC
4 PCS
1 PC
4 PCS
4 PCS
12 PCS
12 PCS
7 PCS
Plastic Tab
FOR INDOOR USE ONLY
MADE IN VIETNAM
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
COMPONENTS LIST:
Description
No.
1
Crown with top panel
2
Left Tube side
3
Right Tube side
4
Wood Shelf Frame
5
Glass
6
Middle Assembly
7
Wood Shelf
Bottom Base
8
9
Back Top Tube
10
Metal (Long)
11
Metal (Short)
Quantity
Sketch
1 PC
1 PC
1 PC
2 PCS
2 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
2 PCS
01-15-2020
Advertisement
Table of Contents
Summary of Contents for aspenhome I260-9133
- Page 1 ASSEMBLY INSTRUCTIONS ITEM NO: I260-9133 Display Case Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment. TOOLS REQUIRED (NOT PROVIDED) I260-9133...
- Page 2 ASSEMBLY INSTRUCTIONS ITEM NO: I260-9133 Display Case STEP 2: Pull out the top panel from the crown. Crown Top Panel STEP 3: Insert the end on left/right tube side to back top tube, attach the left/right tube side to the middle assembly by using 6 bolts (B), lock washers(C) flat washers(D).
- Page 3 ASSEMBLY INSTRUCTIONS ITEM NO: I260-9133 Display Case STEP 5-1: Align the top panel with the groove on the crown, then insert the top panel into the original position and secure it using 7 wood screws(L). STEP 5-2: Attach the metal(long), the metals(short) and the back top tube to the case by using 16 bolts (A), lock washers(C) flat washers(D).
- Page 4 ASSEMBLY INSTRUCTIONS ITEM NO: I260-9133 Display Case STEP 7: Insert the shelf bracket (J) into the holes on each tube side, then place the wood shelf frame and wood shelf on the shelf bracket, secure the wood shelf frame and wood shelf to shelf bracket with screws (K).
Need help?
Do you have a question about the I260-9133 and is the answer not in the manual?
Questions and answers