Download Print this page

HELGI HDbitT User Manual

1 to 2 hdmi extender splitter

Advertisement

Quick Links

3. Connection instruction:
1 ). Connect HDMI input with HDMI output of source device.
2 ). Connect JR blaster extension cab le to the JR extender out port.
3). Connect RJ45 port with RJ45 input port of HDMI extender RX.
4). Connect HDMI output of HDMI extender RX to HDMI input of HDTV and
set the TV source input to corree! HDMI input channel.
5). Power on the devi ce (power indicator led lights) and it works.
• FAQ
Q:
TV display "waiting for connection" on the bottom right corner?
A:
1) Please check if the power supply of the unit (sender) and RX(receiver)
is well connected and the power indicator led lights on.
2) Make sure all cables are firmly connected.
Q:
TV display "Please check the TX input signal" ?
A:
1) please check if there is An HDMI signal input of the unit
2 ) Try to connect the signal so uree directly to display device to see
if there is signal output from source device or change the signal
source, HDMI cables and try again.
Q:
Display not fluent and stable?
A:
1) Please check the cable length between the unit(sender) and RX
(receiver) is within the required range.
2) Press "reset" button on the unit/RX panel, reset and reconnect.
• Specification
ltems
Specification
Compatible with HDCP
HDM!signal
Transport protocol
HDbitT
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
Support resolutions
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
Up to 120meters transmission distance for 1080p 60Hz
Transmit distance
full HD over single CAT6
IR signal
Suppor! 20~60kHz IR device
Input
1 x HDMI
Output
2 x RJ45
Connection
2x LED
indicator leds
Working temperature
0
°
C-60
°
C
Power supply
5V2A
Power Consumption
<lOW
Dimension
252X97.5X25mm
Weight
590g
Color
Black
Disclaimer
The product name and brand name may be registered trademark of relateci
manufacturers.TM and ® may be omitted on the user manual. The pictures
on the user manual arejust for reference,and there may be some slight
difference with the real products.
We reserve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
HDbitT 1 to 2 HDMI Extender Splitter
User manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the HDbitT and is the answer not in the manual?

Questions and answers

Summary of Contents for HELGI HDbitT

  • Page 1 3). Connect RJ45 port with RJ45 input port of HDMI extender RX. Output 2 x RJ45 HDbitT 1 to 2 HDMI Extender Splitter 4). Connect HDMI output of HDMI extender RX to HDMI input of HDTV and Connection 2x LED set the TV source input to corree! HDMI input channel.