Pottery Barn Hotel Marble Top Floor Storage Manual

•
Please read all instructions before beginning assembly.
•
Save all packing materials until mounting is complete to avoid accidentally discarding smaller parts or hardware.
Keep all parts and plastic bags out of the reach of children.
•
For your safety and ease, assembly by two people is recommended.

Hardware included:

1. Towel Bar (2pcs)
2. Philip Head Bolt (4pcs)

Tool Required (Not Included):

Phillips Head Screwdriver (1pc)

Assembly instructions:

1 Pull the drawer half way out of the frame while pressing down on white nylon drawer stopper under drawer
box. Pull drawer completely out of frame. .
2 Use a philip head screwdriver to detach the pre-installed bolt (2) which has been inserted with spring washer
(3) and span washer (4) into the towel bar. Picture 1.
3 Hold one towel bar against the side of the frame; making sure its holes are aligned with the predrilled holes
in the frame. Thread the bolt (2) through the spring washer (3) and span washer (4). Fasten towel bar to
frame by inserting hardware into towel bar from underside of frame. Picture 2.
Picture 1
Hotel Marble Top Floor Storage
3. Spring Washer
4. Span Washer (4pcs)
(4pcs)
Picture 2